世联博研(北京)科技有限公司 主营:Flexcell细胞力学和regenhu细胞3D生物打印机销售技术服务: 美国Flexcell品牌FX-5000T细胞牵张应力加载培养系统,FX-5K细胞显微牵张应力加载培养系统,Tissue Train三维细胞组织培养与测试系统,FX-5000C三维细胞组织压应力加载培养系统,STR-4000细胞流体剪切应力加载培养系统,德国cellastix品牌Optical Stretcher高通量单细胞牵引应变与分析系统 Regenhu品牌3D discovery细胞友好型3D生物打印机,piuma细胞纳米压痕测试分析、aresis多点力学测试光镊,MagneTherm细胞肿瘤电磁热疗测试分析系统
服务电话: 010-67529703
主营产品: Flexcell细胞力学和regenhu细胞3D生物打印机销售技术服务: 美国Flexcell品牌FX-5000T细胞牵张应力加载培养系统,FX-5K细胞显微牵张应力加载培养系统,Tissue Train三维细胞组织培养与测试系统,FX-5000C三维细胞组织压应力加载培养系统,STR-4000细胞流体剪切应力加载培养系统,德国cellastix品牌Optical Stretcher高通量单细胞牵引应变与分析系统 Regenhu品牌3D discovery细胞友好型3D生物打印机,piuma细胞纳米压痕测试分析、aresis多点力学测试光镊,MagneTherm细胞肿瘤电磁热疗测试分析系统
联系我们

orflo品牌MXF002便携式Moxi flow流式细胞仪,迷你型流式细胞仪,Moxi Flow Kit, US Version

  • 如果您对该产品感兴趣的话,可以
  • 产品名称:orflo品牌MXF002便携式Moxi flow流式细胞仪,迷你型流式细胞仪,Moxi Flow Kit, US Version
  • 产品型号:MXF002
  • 产品展商:orflo品牌
  • 产品文档:无相关文档
简单介绍

世联博研(北京)科技有限公司正式做为Orflo中国代理商,主要产品包括Moxi Flow微型流式细胞仪及MoxiZ细胞计数产品系列,迷你细胞计数仪Moxi Z和掌上流式细胞仪MOXI FLOW。

产品描述

                       备有库存现货,随时发货


ORFLO Technologies总部位于美国爱达荷州,拥有多项国际**技术,如微流控、生物信号向电子信号转化、数据采集和分析、配套分析软件设计等,**于现代细胞分析技术**和开发,在国际细胞分析技术竞争中处于**的地位。

ORFLOTechnologies 2010年开发****个掌上细胞计数仪,产品一经推出,很快受到业内广泛认可。目前推出*新代迷你细胞计数仪Moxi Z和掌上流式细胞仪MOXI FLOW

 世联博研(北京)科技有限公司正式做为Orflo中国代理商,主要产品包括Moxi Flow微型流式细胞仪及MoxiZ细胞计数产品系列等。

美国ORFLO公司*新推出的一台手持式微型流式细胞仪。她的外观灵巧,完全可将她托放与掌中,便于移动,让你的实验地点不再被庞大的仪器所束缚;操作便捷,无需受过专业培训就可以完成操作,因为所有操作就只有两步(Plug&Play),上机10秒后就可在彩色触屏显示器上看到实验结果,简便至*。价钱方面,对于绝大多数的实验室来说,如果想拥有她,从经济角度上讲是完全可行的。看到这里估计读者已经迫不及待的想进一步了解和认识她了,下面就由笔者向各位介绍这位灵动、聪慧的姑娘 — MoxiFlow(图1)。



对于它外观的小巧此处不再累述(大小规格仅为26×15×15cm),图片比文字更有说服力(图2);仪器内置4500mAh锂电池,便于在实验室内的移动和随意放置;内置软件程序,480X320pix彩色显示器可清晰呈现数据结果,让您一目了然。至于检测方式,它采用了两种检测的**融合—库尔特电阻原理与荧光检测原理:


图2 手持式流式细胞仪

一、 库尔特原理(用于检测细胞大小及数量)
当悬浮于液体中的细胞通过小孔管时,会取代相同体积的液体,在恒定电流设计的电路中导致小孔管内外的电阻发生瞬时变化,产生电位脉冲,而这种脉冲信号的大小和次数与细胞的大小与数目成正比,因此可用于细胞计数及大小的检测。这正是谈到流式细胞仪的历史而不可避开的库尔特原理,库尔特电阻检测法属于对细胞个体的测量和三维的测量,不但能准确测量细胞的大小,更能对细胞的**数量及浓度进行测量。利用库尔特原理检测细胞大小更近真实,而不像激光衍射散射原理会受到染料颜色和浓度的影响。流式细胞仪(FCM,Flow cytometry),从字面上的cytometry (细胞计数) 也看得出它与细胞计数有着一定的渊源,Wallace Coulter于1947年发明了库尔特原理,用于血细胞分析,随后1953年Coulter公司便推出了世界上**台流式细胞分析仪。而以库尔特原理为主导技术开发细胞计数仪的ORFLO公司在此推出这样一台众望所归的微型流式细胞仪也便是名正言顺了,并利用其**的薄膜传感器技术对细胞进行数量、直径等检测,获取更加精准可靠的数据。

二、 荧光检测(用于检测荧光信号)
MoxiFlow配置了一根532nm固态激光器和一个PMT,检测光谱区域为590/40nm ( 可检测染料:R-PE, PI, Nile Red, Ethidium Homodimer I & III, Sytox Orange等 )。对细胞大小检测的同时以传统流式的方法利用激光激发标记在细胞上的特异性荧光染料,并通过PMT进行检测,获取荧光信号。

MoxiFlow 即利用了以上两种检测方式相结合的方式,在细胞流经小孔管时,同时对细胞的大小、数目及荧光信号进行**的检测(如图3)。

                      

 

化 繁 为 简

一、 简易化操作
微流体系膜片内设细胞过滤功能,所以对于准备上机的细胞悬液无需进行滤网的过滤,直接即可加入膜片孔内准备实验(如图4),此外膜片的窗口处为非透明材质做成,形成小的避光暗室,避免了荧光检测过程中荧光猝灭现象;仅需两步即可完成所有操作步骤。一,将细胞微流膜片插入检测口;二,将50μL样品加入检测孔内,点击Play即可开始检测 (如图5~6);仅10秒钟即可显示出实验结果。输出数据的格式为标准的流式数据格式FCS3.1或.BMP的图像输出格式,结果数据可以以散点图及直方图(如图7)的形式表现出来,并可轻松用手触摸。

二、 程序化实验
MoxiFlow将较为常用的流式实验程序化为软件中的多个选项 (如图8,并在不断更新升级中),在实验室过程中只需点击要进行的实验名称即可完成相应的数据检测,如: 细胞活性检测、 细胞凋亡检、 多参数分析、细胞大小检测、荧光珠子检测、 细胞周期检测(coming soon)等,使用系统内相应实验程序即可,应用哪里,点哪里,无需再对电压、荧光补偿等参数进行调整。没有经过任何专业培训的人员也可轻松操作完成,可见MoxiFlow解放了科研人员对于流式细胞仪使用操作的繁琐性及专业性,是对流式细胞仪的一次崭新的**。

为了展现出MoxiFlow优良的检测性能,下面分别将MoxiFlow与台式流式细胞仪、成像细胞分析系统、血细胞计数板进行比较。结果发现,对于细胞的计数误差要低于其他类型产品,而计数平均值的变异系数(CV)也是*小的,可见 MoxiFlow对于细胞数量的检测表现优良(图9 左);对于细胞活性的检测误差值与平均活性检测的波动性(CV)都是*小的,即在对细胞活性检测的实验中,MoxiFlow依然很好地保证了数据的精准度和稳定性(图9 右)。

下图是MoxiFlow细胞凋亡实验的结果图,此实验是用喜树碱(一种****)对Jurkat 细胞(白血病细胞)分别刺激不同时间(2h,6h,7h)所得到的散点图。可以评测出该**对Jurkat细胞凋亡的作用,并给出各个群落的细胞数量、细胞浓度、占细胞总数的百分比及细胞的平均直径等信息。



总结:

外形的小巧并没有影响MoxiFlow的应用性能,所谓,麻雀虽小五脏俱全。它可帮你摆脱对流式细胞仪“想爱不敢爱”的矛盾心理,让流式不再高不可攀,让细胞在你的掌中流动。




英文介绍:



Flow Cytometers



ORFLO delivers simple, affordable, yet powerful solutions for flow cytometry and cell analysis. Now you can focus your efforts on research and driving your pace of discovery, rather than all the complexity that comes with traditional, complicated flow cytometers. 

ORFLO has revolutionized flow cytometry by integrating traditional fluorescence based flow cytometry with the Coulter Principle. Now for the first time direct cell counts and volume are generated in parallel with fluorescence. At the heart of ORFLO's platforms is their disposable flow cytometer sensor, which eliminates the need for cleaning, maintenance, expensive service contracts and calibration.



Moxi Flow

World's most affordable flow cytometer, ideal for single color flow, cell health and cell QC.



Learn More

Moxi GO & Moxi GO II

Increase the pace of scientific discovery with ORFLO’s next generation Moxi GO™ & Moxi Go II™ Next Gen Flow Cytometers.



Learn More










Product Code: MXF002

Moxi Flow instrument with USB power cord, US style USB power adapter, and Type MF-S cassette pack






 



Supporting Resources

Application Notes
Brochures
Protocols
Quick Start Guides
Software Downloads
Technical Notes
User Manuals
Customer Data
Product Videos

Related Products

Reagents
Assays
Accessories
Antibodies
Cassettes
Instruments


  • Overview
  •  
  • Specifications
  •  
  • How It Works
  •  
  • Customer Data


“Plug and Play” Simplicity - Moxi Flow is the World’s first SMART FLOW CYTOMETER.


“Plug and Play” Simplicity


Moxi Flow is a fully automated, cassette-based flow cytometer that combines unparalleled ease of use with the precision and accuracy normally only associated with more expensive flow cytometers. This ultra-small instrument uses patented microfluidic thin-film cassettes that enable automatic load and measure operation. The Moxi Flow is also the only flow cytometer that auto-aligns the laser to each cassette to enable highly repeatable and robust results every time. No PMT gain adjustment is required. No warm up time required. Just insert a cassette, pipette your sample, and read the results in 10 seconds.

Versatile


Select from one of our standard applications (i.e., Cell Counts, Viability, Apoptosis) or run the system in open “2 Parameter Flow Cytometry” mode for the ultimate in assay flexibility. This miniature open platform can be used for your most common cell assay needs, or to develop sophisticated, custom assays right at your fingertips.

Access your FCS compatible Data with “USB-on-the-Go”


Moxi Flow generates data using the industry standard FCS 3.1 format so you can open and analyze your results using your ORFLO’s VESTIGO software (coming soon), or any other standardized flow cytometry analysis software. Data is transferred simply and easily to a PC or MAC using a mini-USB cable and the on board “USB-on-the-Go” functionality. No additional software is required to perform the data transfer.

  • Cell Count with >95% accuracy
  • Viability with PI
  • Apoptosis with Annexin V
  • Precise cell/particle (Coulter Principle)
  • Blood analysis (RBC counts, WBC counts, CD4 counts, etc.)
  • Somatic Cell Counts in Milk


Cell Count and Viability


Flow cytometry based viability tests with simultaneous Coulter Principle Cell Counts and Cell Volume



Below are screen shots taken directly from the Moxi Flow. The left screen shot is a scatter plot of fluorescence intensity of the Propidium Iodide (PI), used to select for dead cells, versus cell volume on the x axis, converted to cell diameter. The middle screen shot is cell volume only, which shows the cell volume heterogeneity of the cancer line population along with subtle shift in the mean cell volume of the dead cell population. The right screen shot shows the fluorescence intensity of the baseline viable cell population versus the dead cell population.


Propidium Iodide was used to detect the exact cell count of the dead, non viable cells. The viability percent is displayed in the yellow text box. The concentration and volume of the viable live cells and non viable cells is displayed in the black text boxes.



 

Apoptosis (Annexin V) and Cell Count



Below are screen shots taken directly from the Moxi Flow. The left screen shot is a scatter plot of fluorescence intensity of the Annexin V PE versus cell volume on the x axis, converted to cell diameter. The right screen shot is cell volume only, which shows the cell volume heterogeneity of the cancer line population. Annexin V conjugated with PE was used to detect the exact number of cancer cells that were apoptotic. The percent of apoptotic cells is displayed in the yellow text box. The concentration and volume of the non-apoptotic and apoptotic cells is displayed in the black text boxes. This together with the above cell viability and cell count tests gives a read of over all cell health.



 

Cell Count and Transfection Efficiency Checks


Transfection Efficiency Flow Cytometery



Below are screen shots taken directly from the Moxi Flow. The left screen shot is a scatter plot of fluorescence intensity of the RFP (tdTomato, DS Red, Nile Red, etc.) versus cell volume on the x axis, converted to cell diameter. The right screen shot is fluorescence only, which shows heterogeneity the transfect RFP within the cancer line population. The RFP in this case was tdTomato. In this example there were two distinct populations of the transfected cell lines. Both are 100% positively transfected. It is possible that this could be an inidication of cell cycle, the lower population could be in G0/G1 phase with approximately half the DNA of the upper population, G2/M phase.



 

Rapid Immuno Profiling of White Blood Cells, PBMC’s, Whole Blood


Immono Profiling Flow Cytometry



In all tests shown in the figures below Tonbo PE conjugated flow cytometery antibodies were used.


In the screen shots below the PBMC sample was screened for the number of CD2 positive versus CD2 negative cells, using Tonbo’s PE Anti Human CD2 antibody (RPA-2.10).


The RPA-2.10 antibody reacts with human CD2, an approximately 50 kDa glycoprotein, and a member of the Ig superfamily. CD2, also known as LFA-2, is a receptor for CD58 in the human and is expressed on the cell surface of 80-90% of human peripheral blood lymphocytes, a subset of NK cells, and all mature T cells. CD2 mediates lymphocyte adhesion and is involved in T cell activation. RPA-2.10 is reported to block mixed lymphocyte reaction. Please choose the appropriate format for each application.


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD2 positive cells versus the CD2 negative cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.



 

In the screen shots below the PBMC sample was screened for the number of CD3 positive versus CD3 negative cells, using Tonbo’s PE Anti Human CD3 antibody (Hit3a).


The Hit3a antibody is specific for human CD3e, also known as CD3 epsilon, a 20 kDa subunit of the T cell receptor complex, along with CD3 gamma and CD3 delta. These integral membrane protein chains assemble with additional chains of the T cell receptor (TCR), as well as CD3 zeta chain, to form the T cell receptor – CD3 complex. Together with co-receptors CD4 or CD8, the complex serves to recognize antigens bound to MHC molecules on antigen-presenting cells. These interactions promote T cell receptor signaling (T cell activation), inducing cell proliferation, differentiation, production of cytokines or activation-induced cell death. CD3 is differentially expressed during thymocyte-to-T cell development and on all mature T cells.


The Hit3a antibody is a widely used phenotypic marker for human T cells. In addition, binding/cross-linking of Hit3a antibody to CD3e can induce cell activation. The antibody has also been demonstrated to be cross-reactive with Chimpanzee CD3. Please choose the appropriate format for each application.


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD3 positive white blood cells versus the CD3 negative white blood cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.



 

In the screen shots below the PBMC sample was screened for the number of CD4 positive (t cells) versus CD4 negative cells, using Tonbo’s PE Anti Human CD4 antibody (OKT4).


The OKT4 antibody reacts with human CD4, a 59 kDa protein which acts as a co-receptor for the T cell receptor (TCR) in its interaction with MHC Class II molecules on antigen-presenting cells. The extracellular domain of CD4 binds to the beta-2 domain of MHC Class II, while its cytoplasmic tail provides a binding site for the tyrosine kinase lck, facilitating the signaling cascade that initiates T cell activation. CD4, and co-receptors CCR5 and CXCR4, may also be utilized by HIV-1 to enter T cells. Human CD4 is typically expressed on thymocytes, some mature T cell populations such as Th17 and T regulatory (Treg) cells, as well as on dendritic cells. The OKT4 antibody is widely used as a phenotypic marker for CD4 expression. It is cross-reactive with CD4 in several non-human species, including Chimpanzee, Cynomolgus and Rhesus. This antibody recognizes a different epitope, and thus does not block binding of, the alternative Anti-Human CD4 antibody clone RPA-T4 (Reinherz EL, et al. 1979. Proc. Natl. Acad. Sci. 76:4061-4065)


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD4 positive white blood cells versus the CD4 negative white blood cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.



 

In the screen shots below the PBMC sample was screened for the number of CD8 positive versus CD4 negative cells, using Tonbo’s PE Anti Human CD8 antibody (SK1).


The SK1 antibody is specific for the 32-34 kDa alpha chain of human CD8, known as CD8a or CD8 alpha. CD8a can form a homodimer (CD8 alpha-alpha), but is more commonly expressed as a heterodimer with a second chain known as CD8b or CD8 beta. CD8 acts as a co-receptor for antigen recognition and subsequent T cell activation that is initiated upon binding of the T cell receptor (TCR) to antigen-bearing MHC Class I molecules. The cytoplasmic domains of CD8 provide binding sites for the tyrosine kinase lck, facilitating intracellular signaling events that lead to T cell activation, development, and cytotoxic effector functions. CD8+ cytotoxic T cells (CTLs) play an important role in inducing cell death of tumor cells, as well as cells infected by virus, bacteria or parasites.


The SK1 antibody is widely used as a phenotypic marker for CD8 on cytotoxic T cells, thymocytes, as well as on certain cell types that do not also express the TCR, including some NK cells and lymphoid dendritic cells. It is cross-reactive with CD8 in several non-human species, including Baboon, Chimpanzee, Cynomolgus and Rhesus. If used together with an alternative Anti-Human CD8a clone, RPA-T8, the SK1 antibody will not block binding of RPA-T8 to CD8a.


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD8 positive white blood cells versus the CD8 negative white blood cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.



 

In the screen shots below the PBMC sample was screened for the number of CD11 positive versus CD11 negative cells, using Tonbo’s PE Anti Human CD8 antibody (ICRF44).


The ICRF44 antibody reacts with human CD11b, also known as integrin alpha M. This 165-170 kDa cell surface glycoprotein is part of a family of integrin receptors that mediate adhesion between cells (cell-cell) and components of the extracellular matrix, e.g. fibrinogen (cell-matrix). In addition, integrins are active signaling receptors which recruit leukocytes to inflammatory sites and promote cell activation. Complete, functional integrin receptors consist of distinct combinations of integrin chains which are differentially expressed. Integrin alpha M (CD11b) assembles with Integrin beta-2 (CD18) into a receptor known as Macrophage Antigen-1 (Mac-1) or complement receptor type 3 (CR3). This receptor binds and induces intracellular signaling through ICAM-1, ICAM-2, ICAM-3 and ICAM-4 on endothelial cells and can also facilitate removal of iC3b bearing foreign cells.


The ICRF44 antibody is widely used as a marker for CD11b expression on macrophages, granulocytes, and subsets of NK cells. It is reported to be cross-reactive with a number of non-human species including Baboon, Chimpanzee, Cynomolgus, Rhesus and Swine.


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD11 positive white blood cells versus the CD11 negative white blood cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.



 

In the screen shots below the PBMC sample was screened for the number of CD19 positive b cells versus CD19 negative white blood cells, using Tonbo’s PE Anti Human CD19 antibody (SJ25C1).


The SJ25C1 antibody reacts with human CD19, a 95 kDa glycoprotein which acts as a co-receptor, along with CD21 (CR2), CD81 (TAPA-1) and CD225 (Leu13), in support of the functional B cell receptor (BCR). This complex provides antigen-specific recognition and subsequent activation of B cells to proliferate and differentiate into antibody-secreting cells (plasma cells) or memory B cells, which are crucial for secondary antigen encounter. Upon activation and tyrosine phosphorylation, the CD19 molecule can provide an anchor for cytoplasmic signaling proteins such as GRB2, SOS or PLCG2. CD19 is a lineage-differentiation marker, as its expression is detectable at the earliest B cell stages, through development, and is finally lost upon transition to mature plasma cells.


The SJ25C1 antibody is widely used as a phenotypic marker for CD19 expression on B cells, as well as on dendritic cell subsets.


The Moxi Flow Flow Cytometer Cell Counter (Coulter Principle based) is able to clearly separate out the CD19 positive white blood b cells versus the CD19 negative white blood cells, delivering a highly accurate and precise count of the two populations. The fold difference between the positive and negative white blood cells is a simple relative protein quantitation method.


Moxi GO & Moxi GO II

Product Code: MXG001_MXG002_MXG102

Moxi GO 532nm laser (MXG001)
1 PMT - 561nm/LP filter (e.g. PE, PI) - US Version
Moxi GO 488nm laser (MXG002)
1 PMT - User-swappable 525/45nm (e.g. FITC, GFP) or 561nm/LP (PE,PI) filters
Moxi GO II 488nm laser (MXG102)
2 PMT system 525/45nm (e.g. FITC, GFP) and 561nm/LP (PE, PI)

See Product Specifications

Add To Wish List
Request Info



 



Supporting Resources

Application Notes
Brochures
Protocols
Quick Start Guides
Software Downloads
Technical Notes
User Manuals
Product Videos

Related Products

Reagents
Assays
Accessories
Antibodies
Cassettes


  • Overview
  •  
  • Specifications
  •  
  • How It Works


3 or 4 Parameter Next Gen Flow


Increase the pace of scientific discovery with ORFLO’s next generation Moxi Go™ or Moxi Go II™ Next Gen Flow Cytometers. With a one (Moxi GO) or two (Moxi GO II) fluorescent channels, swappable filter sets (MXG002 - Moxi GO 488nm), configurable laser the Moxi Go can be designed to meet your labs cell analysis needs.  Every assay also delivers simultaneous cell count & volume determination, using single-use flow cell.  This eliminates the hassle of traditional flow associated with cleaning, maintenance, clearing of clogs, cross contamination and occasionally replacement of bottles and tubes.  


Furthermore the Moxi Go™ or Moxi Go II™ use very little sample volume, 75ul's allowing you to conserver precious, expensive sample, such as stem cells.  Cell concentrations as low as 10,000 cells per ml are possible, which most experiments would enable a little as 5ul's of sample diluted in 70ul's of PBS.


The Moxi Go™ or Moxi Go II™ can be utilized as an assay development instrument and many powerful cell based assays can easily be optimized and run on the system.  These include:

  • Cell surface immuno-labeling
  • In-Cell Protein Quant
  • CRISPR/Transfection Optimization Studies
  • Up to 4 plex bead based ELISA's using our new on board MPX Relative Quantitation Ap
  • In cell Wester Blots
  • Reactive Oxidation Species Experiments
  • Calein AM studies
  • Phagocytosis Analysis
  • Mito Potential Experiements

The Moxi Go™ or Moxi Go II™ come standard with an ultra-intuitive, plug-and-play interface with free OS updates as long as you own the instrument. No prior flow cytometry experience is required you simply just plug and play.








配套耗材:


一、Moxi Z 微型自动细胞计数仪配套芯片(Cell Counting Cassettes)

芯片覆盖直径范围(2-34微米)内的所有细胞样品,无需根据细胞大小进行更换,

每个芯片可做2个测试。当样品1完成后,只需取出,将芯片的另一端插入Moxi Z,加入样品2。

在一次性盒式芯片中具有更高的性能和简单性。

Moxi Z独特的**保护薄膜细胞计数盒可在8秒钟内提供高精度,可重复的细胞计数和细胞大小分析(S型盒带15秒)。受全球**计数系统使用的金标准Coulter原理的启发,Moxi盒每个测试通过一个细胞感测区域流动数千个细胞,以准确捕获样品中每个单个细胞的基于阻抗的体积测量。基于图像的细胞计数方法,单个细胞的基于阻抗的细胞计数被证明是超过95%的准确度,而75%的准确度。

没有系统污染和集成预过滤器防止堵塞。

Moxi盒式芯片设计有独特的“细胞筛”,以*大限度地减少细胞结块和堵塞。另外,Moxi盒含有100%的样品在盒体内,消除了系统污染和**的可能性。

1、Moxi Z S型细胞计数芯片(Moxi Z Type S Cassettes)

The Type S cassette is ideal for accurately measuring most yeast and other particles as small as 3 µm and up to 20 µm in average diameter including some algae and protozoa. Since the technology is based on a volumetric measurement, non-spherical particles (14 - 4,200 fL) can also be measured accurately.

S型细胞计数芯片非常适用于**测量大多数酵母和其他颗粒,平均粒径小至3μm,直径达20μm,包括一些藻类和原生动物。 由于该技术基于体积测量,因此也可以准确测量非球形颗粒(14-4,200fL)。



Cell Counting Cassettes


Higher Performance & Simplicity in One Disposable Cassette.
Moxi Z's unique, patent-protected thin-film cell count cassettes provide highly accurate, repeatable cell counts and cell size analysis in under 8 seconds (15 seconds for Type S cassette). Inspired by the gold-standard Coulter Principle used in high-end counting systems worldwide, the Moxi cassette flows thousands of cells per test through a cell sensing zone to accurately capture the impedance-based volumetric measurement of each individual cell in the sample. Impedance-based cell counting of individual cells is proven to be over 95% accurate versus a 75% accuracy with image-based cell counting methods. 

No system contamination and integrated pre-filter for clogging prevention. 
Moxi cassettes are designed with a unique "cell sieve" to minimize cell clumping and clogging. In addition, Moxi cassettes contain 100% of your sample within the cassette body, eliminating the possibility for system contamination and sterilization. Cassettes are simply and easily discarded when testing is finished.


Moxi Z Type S Cassettes

The Type S cassette is ideal for accurately measuring most yeast and other particles as small as 3 µm and up to 20 µm in average diameter including some algae and protozoa. Since the technology is based on a volumetric measurement, non-spherical particles (14 - 4,200 fL) can also be measured accurately.



Moxi Z Type S Pack (25 Cassettes)

  |  

Moxi Z Type S Box (250 Cassettes)



Moxi Z Type M Cassettes

The Type M cassette is ideal for accurately measuring mammalian cells or other particles 4-25 microns in average diameter. Since the technology is based on a volumetric measurement, non-spherical particles (34-8,180 fL) can also be measured accurately.



Moxi Z Type M Pack (25 Cassettes)

  |  

Moxi Z Type M Box (250 Cassettes)






MOXI Z System Check Beads (5 mL)

Product Code: MXA005

MOXI Z System Check Beads (5 mL)


sh List




 

Related Products

Accessories
Cassettes
Instruments


  • Specifications


id MXA005
Application Notes Can be used to check proper system function.
Bead Diameter 10 micron
Compatible Instruments Moxi Z
Concentration 1.1 e+5 beads/mL
Formulation Orflo Diluent
Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures
Material of Construction Polystyrene
Overall Dimensions 22.1 mm^3
Sterility Non-sterile
Weight 5 mg

Moxi Z Diluent

Product Code: MXA006

Moxi Z Diluent, 100 mL





 

Related Products

Reagents
Accessories
Cassettes
Instruments


  • Specifications


id MXA006
Application Notes Moxi Z Diluent is special formulated for use with the Moxi Z system for optimal sizing of particles and for operation with the instrument's Small Particle Mode (SPM).
Applications Cell Dilution
Applications Abbreviation Cdil
Cassette Types Type M|Type S
Compatible Instruments Moxi Z
Formulation Proprietary
Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures
Kit Components One 100 ml bottle of diluent
Number of Tests n/a
Overall Dimensions 52 L x 52 W x 106 H (mm)
Protocol Pellet and resuspend cells in Moxi Z diluent or dilute sample with >90% Moxi Z diluent. 2. Pipette 10 uL of sample into tube 3. Pipette 90 uL of Orflo Diluent into tube 4. Gently mix resulting solution to ensure cells are evenly mixed 5. Pipette 75 uL of resulting solution into Moxi Z Cassette, or 50 uL into Moxi Flow cassette 6. Touch screen to run test
Sample Type Mammalian Cells|Large Yeast|Large Algae|Protozoa
Sterility Non-Sterile
Storage Stability AND Handling Store at 2-8C. Use sterile technique when handling. Dispose of waste product in compliance with federal, state and local regulations. Do not inhale or ingest. Avoid contact with eyes and skin, flush affected area with water for at least 15 minutes
Vendor ORFLO
Weight 152 g

Moxi Z Diluent, sample

Product Code: MXA009

Moxi Z Diluent,  5 mL

See Product Specifications






 

Related Products

Reagents
Accessories
Cassettes
Instruments


  • Specifications


id MXA009
Application Notes Moxi Z Diluent is special formulated for use with the Moxi Z system for optimal sizing of particles and for operation with the instrument's Small Particle Mode (SPM).
Applications Cell Dilution
Applications Abbreviation Cdil
Cassette Types Type M|Type S
Compatible Instruments Moxi Z
Formulation Proprietary
Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures
Kit Components One 5 ml bottle of diluent
Number of Tests 75
Overall Dimensions 25 W x 45 H (mm)
Protocol Pellet and resuspend cells in Moxi Z diluent or dilute sample with >90% Moxi Z diluent. 2. Pipette 10 uL of sample into tube 3. Pipette 90 uL of Orflo Diluent into tube 4. Gently mix resulting solution to ensure cells are evenly mixed 5. Pipette 75 uL of resulting solution into Moxi Z Cassette, or 50 uL into Moxi Flow cassette 6. Touch screen to run test
Sample Type Mammalian Cells|Large Yeast|Large Algae|Protozoa
Sterility Non-Sterile
Storage Stability AND Handling Store at 2-8C. Use sterile technique when handling. Dispose of waste product in compliance with federal, state and local regulations. Do not inhale or ingest. Avoid contact with eyes and skin, flush affected area with water for at least 15 minutes
Vendor ORFLO
Weight 11 g
Orflo Accutaseª

Product Code: MXA020

Orflo Accutase cell detachment solution, 1X, 100 mL




 

Supporting Resources

Related Products

Reagents
Assays
Antibodies
Cassettes
Instruments


  • Specifications


id MXA020
Application Notes Recommended for the detachment of adherent cells and dissociation of mammalilian cell lines and primary cells
Applications Cell Detachment
Applications Abbreviation Cdet
Cassette Types Type M|Type S|Type MF-M|Type MF-S
Cell Types Tested fibroblasts|keratinocytes|vascular endothelial cells|hepatocytes|vascular smooth muscle cells|hepatocyte progenitors|primary chick embryo neuronal cells|bone marrow stem cells|adherent CHO and HNK cells|macrophages|293 cells|L929 cells|immortalized mouse testicular germ cells|MIC5|3T3|Vero|COS|HeLa|NT2|MG63|M24 and A375 metastatic melanoma|gliomas U251|D54|HT1080 fibrosarcoma cells|HT29 colon cancer cells|Sf9 insect cells|human embryonic stem cells|human mesenchymal stem cells|and human neural stem cells.
Compatible Instruments MoxI Z|Moxi Flow|zEPI Flow
Formulation Accutase® enzymes in Dulbecco's PBS containing 0.5 mM EDTA and phenol red. 1X concentrate, no preservatives.
Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures
Kit Components One 100ml bottle of cell dissassociation reagent
Number of Tests n/a
Overall Dimensions 52 L x 52 W x 106 H (mm)
Protocol 1. Place 100ml Accutase bottle in room temp water bath or thaw overnight in fridge 2. For Adherent Cells: a. Remove cell media b. Add 1.5ml Accutase per 25cm2 of flask area c. incubate at RT or 37C until cells detach (typically 5-15min) d. Pipette triturate to break apart clusters 3. For suspension cell aggregates: a. Pellet cells at 300xg, 5min b. Resuspend pellet in 1-2ml Accutase c. Incubate 15min d. Pipette triturate to break apart clusters 4. Count cells on the Moxi Z, Moxi Flow, or Zepi Flow (be sure to dilute samples into standard operating range of specific cassette, if they are above the stated concentration limits)
Sample Type Primary Mammalian cells|immortalized adherent cells|non-ES cell types
Sterility Sterile
Storage Stability AND Handling Stable at -20C. After thawing can be stored for up to 2 months at 2-8C.
Tradename ACCUTASE™ is a registered trademark of Innovative Cell Technologies
Vendor ORFLO
Weight 159 g

Orflo Accumaxª

Product Code: MXA021

Orflo Accumax, cell dissassociation reagent, 10X, 100 mL, sterile






 

Supporting Resources

Related Products

Reagents
Assays
Antibodies
Cassettes
Instruments


  • Specifications


id MXA021
Application Notes Recommended for use with the Moxi Z and Moxi Flow platforms when working with clumpy aggregated cells. It is ideal for generating single cell suspensions from clumped cell cultures, detachment of cells from primary tissue and detachment of cells from plastic tissue culturware. Accumax is specifically designed for our combination fluorescence amp impedance based flow cytometers.
Applications Cell Detachment
Applications Abbreviation Cdet
Cassette Types Type M|Type S|Type MF-M|Type MF-S
Compatible Instruments MoxI Z|Moxi Flow|zEPI Flow
Formulation 10X proprietary solution of proteolytic, collagenolytic and DNase enzymes and does not contain mammalian or bacterial derived products.
Intended Use Statement For Research Use Only. Product is not for use in diagnostic procedures
Kit Components One 100ml bottle of cell dissassociation reagent
Number of Tests n/a
Overall Dimensions 52 L x 52 W x 106 H (mm)
Protocol 1. Place 100ml Accumax bottle in room temp water bath or thaw overnight in fridge 2. For Adherent Cells: a. Remove cell media b. Add 1.5ml Accumax per 25cm2 of flask area c. incubate at RT or 37C until cells detach (typically 5-15min) d. Pipette triturate to break apart clusters 3. For suspension cell aggregates: a. Pellet cells at 300xg, 5min b. Resuspend pellet in 1-2ml Accumax c. Incubate 15min d. Pipette triturate to break apart clusters 4. Count cells on the Moxi Z, Moxi Flow, or Zepi Flow (be sure to dilute samples into standard operating range of specific cassette, if they are above the stated concentration limits)
Sample Type Primary Mammalian cells|immortalized adherent cells|Human ES cells|Rodent ES
Sterility Sterile
Storage Stability AND Handling Stable at -20C. After thawing can be stored for up to 2 months at 2-8C.
Tradename ACCUMAX™ is a registered trademark of Innovative Cell Technologies
Vendor ORFLO
Weight 159 g












产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
Copyright@ 2003-2024  世联博研(北京)科技有限公司版权所有      电话:13466675923 传真: 地址:北京市海淀区西三旗上奥世纪中心A座9层906 邮编:100096