器官灌流和生物反应器系统
跟踪器官灌流研究或中空纤维生物反应器系统的生命迹象。
1、优化灌流和生物反应器，在线监测这些重要的参数。
2、理想的肝，肾，肺，心脏和其他灌注器官组织。
3、监测中空光纤和其他连续流动生物反应器，不可或缺的装置。
优势：
1、理想的器官灌流研究。Ultra-P pH, pO2, 和 pCO2c电*很适用于肝，肾，肺，心脏和其他灌注器官组织研究。
2、应用在细胞灌流研究。微型溢流电*可以应用于各种动物或植物细胞的灌流研究。
3、所有的组件都不会产生排斥。所有的电*组件都是由玻璃、含氟聚合物、塑胶、环氧树脂，他们与灌流液完全兼容，并且可以无泄漏连接。
4、低容量溢流系统。所有的溢流电*都有较小的内部容量，流动率没分钟1-150 ml。
5、使用硅橡胶管或者其他柔韧的管。电*终端部件有软管倒钩装置，硅橡胶管或者其他柔韧的管如果滑落倒钩装置，也不会引起泄露。
6、透光流动的细胞。透光流动的细胞有利于简单的气泡检测和气泡消除。
7、连续记录pH、 pO2 和 pCO2c。pO2溢流组件可以直接安装任何标准的带状图表记录器，进行持续研究。pH和 pCO2c溢流组件连接任何标准的带状图表记录器，使用一个 Lazar pH/millivolt 计量仪或者任何标准的实验室pH/millivolt 计量仪。
8、快速响应。所有溢流电*参数每增长50%反应时间小于30秒。
规格：
MODEL FTPH-2 FLOW THROUGH PH ELECTRODE
PH值范围：1-13
温度范围：0-80
内部容量：小于50微升
电缆接头：U.S. Standard, BNC, Radiometer 或其他标准计量仪。电缆长度标准：30英寸。
响应时间：每个PH装置小于10秒钟
液体流动装置：微型软管倒钩接头兼容任何标准尺寸的硅橡胶或其它类型的软管。
MODEL DO-166FT FLOW THROUGH PO2 ELECTRODE
pO2范围：0-760 Hg
温度范围：0-50
内部容量：小于200微升
电缆接头：双香蕉插头可连接条带记录器或者U.S. Standard, BNC, or Radiometer可连接PH计量仪。电缆长度标准：30英寸。
响应时间：90%阅读小于12秒钟。
液体流动装置：微型软管倒钩接头兼容任何标准尺寸的硅橡胶或其它类型的软管。
MODEL GS-136COFT FLOW THROUGH PCO2 ELECTRODE
pCO2范围：0-500mmHg
温度范围：0-50
内部容量：小于200微升
电缆接头：U.S. Standard, BNC, Radiometer 或其他标准计量仪。电缆长度标准：30英寸。订购请注明
响应时间：改变100mmHg 小于20秒钟
液体流动装置：微型软管倒钩接头兼容任何标准尺寸的硅橡胶或其它类型的软管。
订货须知：
完整的3个参数检测系统包括pH、PO2、PCO2溢流模块，他们由微电*和微型溢流细胞的输入和输出端口组成；三个参数pH PO2、PCO2各自有独立的分析器用 RS232输出；分析器有三个USB转换器标志，RS232可插入电脑USB端口。电脑完整的软件程序可将三个参数检测、记录和制图。
单参数溢流组件：
Model FTPH-2 - micro flow through pH electrode module 微型溢流PH电*组块
Model DO-166FT micro flow through pO2 system 微型溢流PO2系统
Model GS-136COFT micro flow through pCO2 system 微型溢流PCO2系统
Model ISM-146 NAFT - micro flow through sodium system 微型溢流钠系统
Model ISM-146CLFT - micro flow through chloride system 微型溢流氯化物系统
Model ISM-146KFT - micro flow through potassium system 微型溢流钾系统
Organ Perfusion Monitoring System
|
|
Multiparameter monitoring System for
Organ Perfusion and bioreactor Systems
|
Track the vital signs of your organ perfusion study or hollow fiber bioreactor system.
-
Optimize your perfusion or bioreactor by monitoring these vital parameters online
-
Ideal for liver, kidney, lung, heart, and other perfused organ tissues
-
Indispensable for monitoring hollow fiber and other continuous flow bioreactors.
ADVANTAGES:
-
IDEAL FOR ORGAN PERFUSION STUDIES. The Ultra-P micro flow through electrodes for pH, pO2, pCO2, and temperature are ideally suited for perfusion studies in liver, kidney, heart, lung, and other perfused organ systems.
-
USED IN CELL PERFUSION STUDIES. The Micro flow through electrodes can also be used in cell perfusion studies of various animal and plant cells.
-
ALL BIOCOMPATIBLE COMPONENTS. All electrode components are made of glass, fluoropolymer, acrylic, and epoxy and are completely compatible with perfusate media.
-
LOW VOLUME FLOW THROUGH SYSTEMS. All flow through electrodes have low internal volumes and are designed for flow rates between 1 and 150 ml per minute.
-
USE WITH SILASTIC OR OTHER FLEXIBLE TUBING. Electrodes come with hose barb end fitting. Just slip the silastic or other tubing over the hose barb fitting for a leak free connection.
-
OPTICALLY CLEAR FLOW CELLS. Optically clear flow cells make for simple visual bubble detection and bubble elimination.
-
CONTINUOUSLY RECORD PH, PO2, PCO2, AND TEMPERATURE. The pO2, and temperature flow-through modules plug directly into any standard strip chart recorder for continuous recording. The pH and pCO2 flow-through modules can be interfaced to a strip chart recorder using a Lazar pH/millivolt meter or any standard laboratory pH/millivolt meter.
-
RAPID RESPONSE. Response time for all the flow through electrodes is less than 30 seconds for a 50% increase in the parameter being monitored.
SPECIFICATIONS
MODEL FTPH-2 FLOW THROUGH PH ELECTRODE
pH range: pH 1 to 13
Temperature Range: 0 to 80 oC
Internal Volume: less than 50 microliters
Connector Cable: Available in U.S. Standard, BNC, Radiometer, * or other common pH meter connectors. Standard 30 inch cable length. Specify connector type when ordering. Response Time: Less than 10 seconds per pH unit.
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard size silastic or other types of flexible tubing.
MODEL DO-166FT FLOW THROUGH PO2 ELECTRODE
pO2 range: 0 to 760 Hg.
Temperature Range: 0 to 50 oC
Internal Volume: Less than 200 microliters
Connector Cable: Available in dual banana plug for Interface with strip chart recorder or U.S. Standard, BNC, or Radiometer* plug for Interrace with pH meter. 30 inch cable length. Specify connector type when ordering.
Response Time: Less than 12 seconds for 90% of reading
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
MODEL GS-136COFT FLOW THROUGH PCO2 ELECTRODE
pCO2 range: 0 to 500 mm Hg.
Temperature Range: 0 to 50 oC
Internal Volume: Less than 200 microliters
Connector Cable: Available in U.S. Standard, BNC, or Radiometer* or other common pH meter connectors. 30 inch cable length. Specify connector type when ordering.
Response Time: Less than 20 seconds for 100 mm Hg change.
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
MODEL T-176FT FLOW THROUGH TEMPERATURE PROBE
Temperature Range: 0 to 100 oC
Internal Volume: less than 50 microliters Connector
Cable: Available in dual banana plug for interface with strip chart recorder or U.S. Standard, BNC, or Radiometer* for interface with pH meter. 30 inch cable length. Specify connector when ordering.
Response Time: Less than 10 seconds for 20 oC change
Fluid Flow Fittings: Miniature hose barb connectors compatible with standard silastic or other types of flexible tubing.
ORDERING INFORMATION
COMPLETE MULTIPARAMETER MONITORING SYSTEMS Model PFS-1
Complete 4 parameter monitoring system including pH, pO2, pCO2, and temperature flow-through modules. Instrument console, flow cell tray, digital display monitor and output connector for direct connection to strip chart recorder. pH and pCO2 each require a separate pH/millivolt meter to use with strip chart recorder. pO2 and temperature proves plug directly into strip chart recorder.
Model PFS-2 perfusion monitoring system.
Same as above, but includes 2 digital pH/millivolt meters for use with pH and pCO2 flow-through module. A complete 4 parameter system for direct interface with a strip chart recorder.
COMPUTER INTERFACE SYSTEMS
-interface your multiparameter monitoring system with your pc
Model PC-201 computer interface for IBM or compatible computer.
Includes A to D convertor (analog to digital), interconnect cable and software package. Connects directly to Model PFS-2 perfusion monitoring system.
Model PC-301 computer with interface.
Includes computer with 640K RAM, floppy disk, keyboard, monochrome monitor, A to D converter, interconnect cable, and software package. Connects directly to Model PFS-2 perfusion monitoring system. Computer system can also be used to monitor other laboratory parameters such as temperature, pressure, and pH.
SINGLE PARAMETER FLOW THROUGH MODULES
Model FTPH-2 - micro flow through pH electrode module
Model DO-166FT micro flow through pO2 system
Model GS-136COFT micro flow through pCO2 system
Model T-176 - micro flow through temperature system
Model ISM-146 NAFT - micro flow through sodium system
Model ISM-146CLFT - micro flow through chloride system
Model ISM-146KFT - micro flow through potassium system